Netgear AC1900 WiFi Extender Setup

Netgear AC1900 EX6400 dual-band WiFi mesh extender boosts your existing network range and delivers WiFi up to 1.9Gbps. To set it up, only a few minutes are required. This guide talks all about how Netgear AC1900 WiFi extender can be configured and other related topics. Thus, quit waiting and stick to reading.

Netgear AC1900 WiFi Extender Setup via WPS Method

The following steps have shed light on how you can perform Netgear AC1900 EX6400 setup using the WPS [WiFi Protected Setup] method:

  • Unpack your Netgear AC1900 wireless range extender.
  • Place the extender in the same room where your home router is kept.
  • Press the power button after plugging the extender into a wall socket.
  • Find the location of the WPS button.
  • Press it as soon as you locate it.
  • Now, look for the same button on your router as well and then press it.
  • Change the location of your Netgear AC1900 EX6400 mesh extender.

Note: While changing the location of your Netgear AC1900 WiFi extender, see to it that cordless phones, mirrors, fish tanks, treadmills, refrigerators, microwave ovens, utensils containing water, televisions, washing machines, baby monitors, aluminum studs, and Bluetooth speakers are kept far from it.

Netgear AC1900 wireless range extender

Netgear AC1900 EX6400 Login via Manual Method

The manual method is by far the most used method to perform Netgear AC1900 EX6400 login because of its easy-to-understand nature.

Here is how you can log in to your Netgear AC1900 WiFi extender manually with ease:

  • For Netgear AC1900 EX6400 login, turn on your extender.
  • Take an Ethernet cable.
  • Use the cable to create a connection between your devices [extender and router].
  • Open an internet browser on your computer or laptop.
  • Double-click on the web address field.
  • Thereafter, insert the default web address, i.e., and press Enter.
  • In some time, the Netgear AC1900 EX64oo login page will come into view.
  • Enter the default login credentials belonging to your device.
  • Hit Log In.

If after following these instructions, you are unable to log in to your range extender via the manual method, waste no more time reaching out to our support team.

Troubleshoot Not Working Issue

Many users face the not working issue while performing Netgear AC1900 EX6400 extender login manually. One can get rid of it with the help of these hacks:

1. Power Supply

See to it that your Netgear AC1900 extender is receiving an adequate power supply. If you find the wall socket into which you have plugged your device is damaged, take our advice and connect it to another outlet.

2. Ethernet Connection

Used an Ethernet cable to connect your devices? Make sure that it is not worn out. In case it is, bring a new one home. Apart from this, the connection that your router and Netgear AC1900 EX6400 extender have should be finger-tight.

3. Distance

If you haven’t placed your Netgear AC1900 WiFi extender near your home router, it isn’t a shock that you are stuck with setup issues. Therefore, make sure that both your devices are placed close to each other. But, avoid placing them neck to neck.

4. Web Address

Check the web address that you have inserted into the web address field of your browser. Is it not entered correctly? No? In that case, re-enter it. Additionally, do not input the default address in the search bar.

5. Internet Browser

Whether you are using Internet Explorer, Opera, Apple Safari, Google Chrome, Microsoft Edge, Mozilla Firefox, or any other browser, it should not be outdated. Also, it shouldn’t be accumulated with browsing history, cache, and cookies.

6. Antivirus Software

Perhaps, an antivirus software is installed on your PC. This can prevent you from accessing the login page thereby stopping you from completing the setup process. To take care of this thing, all you need to do is, temporarily disable this software on your system.

If even after walking through these steps, you are unable to access the page of your Netgear AC1900 EX6400 extender, it is recommended that you contact our technicians. Our experts are at your service 24x7.

Update Netgear AC1900 WiFi Extender Firmware

Right after you finished setting up the Netgear AC1900 EX6400 WiFi mesh extender, did it start behaving weirdly? Well, that is because its firmware is demanding to get updated.

Update Netgear AC1900 WiFi Extender Firmware

Here is how the firmware of your Netgear extender can be updated manually:

  • Power up your extender and then connect it to the router.
  • Open a web browser on your system and visit
  • Once you access the login window, enter the username and password.
  • Click Log In.
  • Select the Settings menu and click the Firmware Update button.

Although these steps will be able to help you successfully perform the Netgear AC1900 WiFi extender firmware update process, in case, they do not, get in touch with our well-versed experts. Don’t worry about the time at which you should contact them as they are always available to assist you.

Netgear AC1900 EX6400 Extender Reset

At times, Netgear AC1900 WiFi extender users get stuck with technical issues so deep, that we are left with no choice other than to advice them to perform factory default reset.

If water has gone over your head too, then you should restore your device to its default factory mode via the steps mentioned below:

  • First of all, ensure that your device is properly connected to the wall socket.
  • Assured? Now, find where the Reset button is located on your device.
  • Found? Good. Press the button.
  • Hold on for some time.

Got stuck while resetting your Netgear AC1900 WiFi extender? Either use the manual method to execute the same process or ping our technical experts.

How to Change Netgear AC1900 EX6400 Password?

Considering you set up your Netgear AC1900 EX6400 wireless range extender using the default password, it means that its network can be accessed by anyone. Nowadays, one just needs to know the default password of your device to hack into it.

To avoid this from happening, we recommend that you change the admin password of your Netgear AC1900 WiFi extender. Here is how you can do so:

  • Gain access to your PC.
  • Log in to your mesh extender.
    Note: You can refer to the step-by-step guidelines mentioned above in this post to perform Netgear AC1900 EX6400 extender login.
  • Once the BASIC Home screen displays, go to Advanced > Administration.
  • Click the Set Password option.
  • You need to enter your current as well as the new password.
  • Hit Apply.
  • Before you can even blink your eye, your settings will get saved.

If you don’t want to change the password of your Netgear AC1900 WiFi extender manually, you can consider using the Netgear app.

Netgear AC1900 WiFi Extender Manual

When you purchase a brand new Netgear AC1900 WiFi mesh extender, you get a manual in the box. This manual has everything that a person needs to go about the setup process. All one needs to do is, walk through the step-by-step guidelines given in there.

However, sometimes, understanding these instructions can become a little difficult, especially for non-tech-savvy users. Therefore, the best way to configure your Netgear AC1900 EX6400 extender is by contacting our professionals.

Netgear AC1900 Extender Not Connecting to Router?

Sometimes, no matter how careful a user gets while performing Netgear AC1900 EX6400 setup process, if the extender is not connecting to the router, every effort goes down the drain. To troubleshoot this issue, you can refer to the guidelines given here:

  • Instead of using a wireless source, use a wired one to connect your devices.
  • Make sure that your extender and router are placed in proximity.
  • The connection between your devices should be finger-tight.

Trust us; these tips will surely help you fix the extender not connecting to router issue. On the off chance, they do not; you can always turn to our technicians.

Netgear AC1900 Extender

Netgear AC1900 Extender Ethernet Ports Not Working?

1. Reboot Your Netgear Extender

The first and foremost thing that you should do to troubleshoot the Netgear AC1900 EX6400 extender Ethernet ports not working issue is to reboot your device.

In order to do so, you are required to unplug your device from the wall socket from its socket, count from 1 to 10, and then, reverse the first step.

Now, check if you are able to successfully fix the Ethernet ports not working issue. If not, consider going through the next hack.

2. Check the Ethernet Cable

Chances are that the Ethernet port on your Netgear AC1900 WiFi extender is working just fine but perhaps there is something with the Ethernet cable you have used.

Don’t believe us? Check for the same. Is what we are saying indeed true? In that case, consider replacing your existing wire with a new one.

3. Enable the Ethernet Option

At times, the Netgear AC1900 WiFi extender Ethernet port not working issue can also occur if the ‘Ethernet’ option is not enabled. Therefore, enable this option as soon as possible. Wondering how you can do so? Well, wonder no more. Simply contact our experts and give them a chance to help you out.

Disclaimer:- The is an autonomous online solution, support and assistance provider for various issues with third-party networking gadgets. apart from this, any third-party trademarks, brands and products names used on our site is just for informational and referential purpose and we hereby disclaim any sponsorship or affiliation with any such third-party vendors. We are third-party independent online support service provider whose services are provided only on demand/request by users or customers.