Nighthawk AX8 WiFi Mesh Extender Setup: A Complete Guide
First of all, we would like to congratulate you on buying such an outstanding WiFi device. Nighthawk AX8 WiFi mesh extender is capable of delivering high-speed internet to its users to access everywhere in their house. But, the thing is – you have to configure it.
What happened? Don’t know how to configure Nighthawk AX8 WiFi mesh extender? Don’t worry! We have come up with this blog post. Here, you will get the instructions to set up your wireless range extender from the comfort of your home.
So, without much delay, let’s get started!
Methods to do Nighthawk AX8 WiFi Mesh Extender Setup
Given below are two easy methods that can be used to set up Nighthawk AX8 WiFi mesh extender:
- Manual Method
- WPS Method
Let us now make you familiar with the entire process of setting up your Nighthawk device using these methods.
Nighthawk AX8 WiFi Mesh Extender Setup - Manually
Following are the instructions that will help you install your WiFi range extender using the manual method:
Step 1: First things first, unbox your Netgear Nighthawk WiFi extender and plug it into a working wall socket.
Step 2: Now, connect your Netgear extender and router using an Ethernet cable.
Step 3: Once you are done, launch a web browser of your choice and enter 192.168.1.250 in the address bar.
To prevent typing errors, we suggest you copy 192.168.1.250 and paste it into the browser’s URL bar.
Step 4: Press Enter and you will be taken to the new extender setup page.
Step 5: Enter the default username and password of your WiFi range extender into the required fields.
Step 6: Click Log In.
Step 7: The dashboard of your Nighthawk range extender will come into view.
Step 8: Follow the on-screen instructions and finish setting up your Nighthawk AX8 WiFi mesh extender.
That’s it! The section on how to perform the Netgear extender setup using the manual method ends here. In the event that you find any difficulty, go through the next section and know how to configure your WiFi range extender using the WPS method.
Nighthawk AX8 WiFi Mesh Extender Setup via WPS
Mentioned below are the steps explaining the process of Netgear extender setup using the WPS method:
Step 1: Ensure that your Nighthawk extender and router are properly connected.
Step 2: Locate the WPS button on your WiFi mesh extender. Once found, press it gently and wait for a short while.
Step 3: Thereafter, press the WPS button on your main router as well.
Kudos! The Netgear extender setup process is successfully completed using the WPS method. Now, access the mywifiext setup wizard and make changes to the extender accordingly.
Troubleshooting Nighthawk AX8 WiFi Mesh Setup Issues
- Ensure that your WiFi range extender and router are not connected using a damaged Ethernet cable. Also, make sure that the connection between the devices is finger-tight.
- Your Netgear extender must be placed in the same room as your router.
- There shouldn’t be any interference-creating devices placed in the path of your Netgear WiFi range extender. To know more about the instructions, contact our technical executives anytime.
- The web browser you have used for entering 192.168.1.250 must be up-to-date. Apart from this, ensure that the browsing history is wiped off.
- If you are using the WPS method to perform the Netgear extender setup, ensure that your router consists of the WPS button on it.
Need More help?
We are ending up this post with the hope that the methods we have provided you here helped you configure your Nighthawk AX8 WiFi mesh extender with ease. In case you need more help, we suggest you get in touch with our technical experts right away. They will surely make you aware of the Netgear extender setup process.