Nowadays, users of Netgear extender are increasing day by day as it gives the best internet services to their users. With the help of advanced technology features, Netgear extender boosts the existing network throughout the house with blazing fast internet speed. But despite being an amazing device it also has some technical complications that users experience nowadays after performing the Netgear WiFi extender setup. The most recent issue is Netgear extender won’t connect to router. If you are also facing the same and trying to figure out the solution to fix it, then you have come across the best post.
Here, in this blog, we will include everything about the issue and grant you the most working hacks out there to fix the Netgear extender won’t connect to router issue.
We advise users to walk through this write-up without skipping the any information. We are sure that you will be able to connect the extender to the router. Read on!
Well, before we get familiar with the hacks, we would like to tell you about the contributing factors so that you can understand them and will able to fix the trouble easily.
Here we discuss some possible reasons only that usually cause the Netgear extender won’t connect to the router issue.
The main cause why your extender is not connecting to the router is no internet connection. Without internet you will not be able to access the mywifiext.net web address. Or, are not able to connect devices. It could be due to a power malfunction with your router. Or maybe a temporary issue from the internet service provider.
If you use the Ethernet cable to make the wired connection between the extender and router maybe it is defective or damaged somewhere.
WiFi interference also could be the reason behind the extender not connecting to the router issue. Because WiFi interference weakens the strength of WiFi. As a result, extenders face difficulty to connect with the router.
The first and foremost hack you have to try is rebooting the networking device because most of the troubles related to networking devices can be fixed by restart process. So, there is a chance that your luck will work.
Moreover, by doing this you can remove the temporary hiccups from the device as well. Below we highlighted instructions to restart the device in a hassle-free manner.
Now, you can turn on your device to check issue is resolved or not. If not then, move to the next possible solution.
Now, you should make a small inspection of the Ethernet cable to ensure it works properly or not. Below we mentioned some points you need to keep in mind while checking.
In case you find any cut and broken area on the cable then change the cable or repair it if possible.
Remove the wireless interference from the device because it weakens the strength of networking device signals. To avoid it, follow the following points:
These are the hacks that you can use to fix the Netgear extender won’t connect to router issue in a hassle-free manner.
Once the extender is connected to the router you should update the firmware by accessing the 192.168.1.250 IP address. By doing this you will get the best results from the device.
We hope this write helps you to fix the extender not connecting to the router issue in a hassle-free manner. You just need to follow the above-mentioned hacks properly.