EAX80 Firmware Update Stuck Searching For New Update

Fix: EAX80 Firmware Update Stuck Searching For New Update

Netgear Nighthawk EAX80 dual-band wireless range extender is one of the best WiFi devices to boost WiFi signals, letting users work seamlessly on their connected devices no matter if they move from place-to-place. Though the extender obeys all the orders instantly, some users reported that their device is not dancing to their tunes and got stuck when searching for a new update for the model. If you’re also screwed and experiencing the same, here is how to fix the Netgear Nighthawk EAX80 WiFi range extender firmware update stuck problem.

What to Do if Nighthawk EAX80 Firmware Update Stuck

Firmware updates usually turn out to be pretty reliable. But sometimes they do get stuck and take longer than you expect. The points listed below will shed light on the potential causes of firmware update stuck along with tips to troubleshoot them.

Caution: Please note that if you not a techie, you may bring your extender to a more serious situation. Thus, it is better for you to contact experts for resolving the issue instead of playing around the problem on your own.

Causes Behind Nighthawk EAX80 Firmware Update Stuck Issue

When you perform a firmware update, there are certain points you need to keep in mind. You might be in the spot of hassle due to various reasons like:

How to Update Firmware on Netgear Extender EAX80

If you have followed the steps the same as mentioned above, then the problem could be hardware-related. For getting the firmware update stuck issue fixed, walk through the troubleshooting steps below.

How to Fix Nighthawk EAX80 Firmware Update Stuck

There are various methods for jump-starting a stuck firmware update. The most important thing is to wait. The firmware update may really be moving slowly.

But, if you have already waited for an hour and still seeing the same message, your extender probably will never finish the firmware update process. At least, not without some help.

Fix 1: In very rare cases whilst installing updated firmware on a Netgear extender, it is possible that the process will get stuck due to the device/computer you are using is not correctly releasing the driver whilst the firmware update takes place.

Whenever firmware update stuck happens, just restart the device you are using to get the update. However, if that update is totally adorned, then you don’t have much choice.

Fix 2: The other easiest way to resolve the Firmware Update Gets Stuck issue is to quickly remove the power plug of your extender from its electrical outlet and plug it in again. The firmware update process should then continue as normal. Please note that after the firmware update has completed, your Nighthawk EAX80 will need to be rebooted by flipping the power switch off and on again. However, if the firmware update process does not continue, try the next fix to get the job done.

Fix 3: The last way to fix the firmware update stuck issue while updating a range extender is to reset the device and configure it again. If you are not sure about the steps for reconnecting your extender and making it working again, click here to know how to Reconnect a Netgear Wireless Range Extender to the Home Network.

It is expected that you will no more experience the firmware update stuck issue on your Netgear Nighthawk EAX80 WiFi range extender. If still the problem is making you feel like banging your head, contact our technical experts for immediate help.

Disclaimer:- The mywifiext.cc is an autonomous online solution, support and assistance provider for various issues with third-party networking gadgets. apart from this, any third-party trademarks, brands and products names used on our site is just for informational and referential purpose and we hereby disclaim any sponsorship or affiliation with any such third-party vendors. We are third-party independent online support service provider whose services are provided only on demand/request by users or customers.